How to start using BeamTrainer
2x AA batteries – not included. Press lightly on the marked battery supporter space lid and pull slightly. In order to remove batteries, pull a strip that is lying under the batteries. When inserting batteries, take care with correct polarity and positioning of the strip that has to lie underneath them. Always insert alkaline 1.5 V AA size batteries. Take care that the batteries are the same and both new. In cases of no use of Beam Trainer devices for a longer period taking batteries out, is recommended.
Custom adjustable tripods, so you can perform measurements for many different sports.
Switching it on & Selecting a channel
The Beam Trainer system is switched on by pressing the POWER/MODE button for about half a second. As the LED light goes on, pressure to it should be discontinued. The Beam trainer device QF11-BT (or QF11-T) needs radio wave connection with the frequency of 915MHz. Four channels are available. After the device is switched on, the first channel is chosen. One LED blink denotes the first channel selected. If a change of channel is needed, pressing the “POWER/MODE” button is necessary to choose the next one which is noticed by the appropriate number of LED blinks.
Setup your test ground
You can set up your own test or use drills from our ebook, for which you can e-mail us, and it will be sent to you privately.
Download BeamTrainer app from iStore or Google Play look at some of our live video guides bellow.